SPLIT TEE
The shape of a barred tee is like a butt welding pipe tee with some bars in the branch of the tee. The bars are used for preventing the pig from running out in the branch of the main pipe. It is commonly used in a pigged pipeline, so it is also called piggy tee.
- Benefits of a split tee:
- • There are multiple benefits of using a split tee. Aside from
the obvious, being able to tie into a line while it remains
in service, a split tee is:
- • Suitable for hot tapping activities and for installation of
line stops. (Commercially, a line stop could be a
Stopple which is installed in a line when a repair is
necessary and the line cannot be taken out of service.)
The shape of a barred tee is like a butt welding pipe tee with some
bars in the branch of the tee. The bars are used for preventing the
pig from running out in the branch of the main pipe. It is
commonly used in a pigged pipeline, so it is also called pigged
tee.
Available Grade: 4” to 80” With thickness up to 50mm
Grades:Carbon Steel, Alloy Steel
BARRED TEE
Tube Plugs or Tapered tube plug seal the ends of leaking tubes,
providing longer use of the Condensers, Heat Exchangers, Boilers
and Chillers. The uniform taper and the smooth surface finish
assure positive sealing with minimum installation force. The
one-piece design of the pin plug provides an easy solution to
permanent plugging for tubes or tube sheet holes.
Available Size: 5mm to 125mm
Material: Carbon steel, Stainless Steel, Alloy
Steel, Titanium, Brass, Copper, Aluminium,
Bronze, Hastelloy, Monel, Inconel, Duplex
and Super Duplex
TAPPERED TUBE PLUGS
+91 9769256593 info@purohitpipes.com
- • When done correctly, no potential for weld to penetrate
tapping area. Though care needs to be taken not to
penetrate the line that is being welded on. Welding burn
through could cause the line to fail.
- • Full bore split tees are available. Generally there is a
full complement of reducing pipe size when using a split
tee.
- Available size: 4" to 80" With thickness up to 50mm
